4
With a 19mm open-end wrench, adjust the NS levels in relation to the
machine table by screwing and unscrewing nut EH of the NS feet.
Check the levels with a ruler.
After adjusting level alignment, tighten the nuts of bracket E
permanently (10mm tubular socket 5mm hex head key).
Remove the alignment thread. Insert the plug at the end of the section.
EH
Mise à niveau:
CONNECTING THE NUMERIC STOP
The NS has 3 DIN plugs to be connected to the machine, above the
front right-hand foot.
MALE FEMALE FEMALE
DIN4
DIN 5 DIN 5
1
2
3
1
2
3
