Cassese CS 88, Техническое и руководство пользователя

Страница: 10 / 17

7
USE
1
2
3
SETTING UP THE WEDGE CARTRIDGE
Move the sliding table forwards to allow access to the
cartridge. (1)
Pull the positioning cord back, using the ball as a grip. (2)
Push the cartridge fully home in the distributor slot. (3)
Release the wedge pusher cord carefully to avoid
damaging the pusher and spring.
Note: For easier changing of the wedge magazine during
operation, the wedge cartridge can be accessed by lifting
the sliding table from the rear with the finger.
The joining is performed by using metal wedges, a Cassese invention,
designed to ensure very tight corners. Seven sizes are available : 3, 4, 5, 7,
10, 12 and 15 mm. They come in throw-away cartridges that are colour-
coded per size for easy identification. Cartridge wedges exist in two ver-
sions : NORMAL for soft and normal timbers and HW for very hard tim-
bers. These hardwood wedges are to be used only on hardwoods.
Your CS 88 / CS 89 machine is designed to use all sizes of Cassese car-
tridges without having to change any parts on the machine or having to
adjust anything.
For the long term performance and reliability of your CS 88 / CS 89,
only use genuine CASSESE cartridge wedges.
Beware of counterfeit products.
MEANS OF ASSEMBLY