Caso Wine Duett 21, Руководство по эксплуатации

Страница: 48 / 57

caso Wine Duett 48
23.5.2 Legs/feet
Included in the delivery there are 3 bgger feet being pre-installed and one smaller foot, not
being fixed.
This small foot should be screwed into the hole in the hinge of the door.
By screwing or unscrewing this foot you can adjust the wine cooler to have an even stand.
23.5.3 The handle installing
The wine cooler comes with 1 metal stainless steel handle. To install simply screw them to
the door with the supplied screws.
23.5.4 Wine shelves
Remove all bottles from the shelves. Lift the shelf upwards and the gently pull it out. Any of
the wine shelves can be removed to accommodate larger bottles.
23.5.5 To remove a shelf
Remove all bottles from the shelves. Lift the shelf upwards and the gently pull it out.
Please note
► Ensure that the tabs are firmly engaged in place before storing any bottles.
23.6 Electrical connection
In order to ensure the safe and trouble-free operation of the device, the following
instructions must be observed for the electrical connection:
•
Before connecting the device, compare the connection data (voltage and frequency)
on the rating plate with those of your electrical network. This data must agree in order
that no damages occur in the device. If in doubt, ask your qualified electrician.
•
The electrical outlet must be protected by a 16A safety cut-out switch.
•
The connection between the device and the electrical network may employ a 3 meter
long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple
plugs or gangs is prohibited because of the danger of fire that is involved with this.
•
Make sure that the power cable is undamaged and has not been installed under or
over hot or sharp surfaces.
handle
screw