Troubleshooting
caso MCDG 25
89
17 Troubleshooting
This chapter provides you with important notices with regard to
operating the device. Observe the following notices to avoid
dangers and damages:
17.1 Safety notices
Attention
►
Only qualified electricians, who have been trained by the
manufacturer, may carry out any repairs on electrical
equipment.
►
Improperly performed repairs can cause considerable
dangers for the user and damages to the device.
17.2 Fault indications
In the event of a fault, an error code will appear in the display; it
describes the cause of the fault.
Error code
Description
E01
Excessive temperature within cooking
chamber
The overheating cut-out terminated the current
program at a cooking chamber temperature of
300°C.
Press the
Stopp/Abbruch
button to
acknowledge this fault.
The device can be re-activated after the cool
down phase.
E03
Sensor fault
The device has detected an error on a sensor
and has terminated the current programme.
Press the
Stopp/Abbruch
button to
acknowledge this fault.
Please note
►
If error messages continue to appear after an extended
waiting period and restarting the device, then the device will
need to be sent to Customer Service to be inspected.