14
15
Turning Power On and Off
Use the procedures below to turn power on or off.
■
■
To turn on power
Press
. This will turn on power and cause the power lamp to light green.
• Before turning on power, connect the supplied AC adaptor and power cord to the
printer. For information about connections, refer to steps 2 through 4 under
“Connecting with a USB Cable (Computer Only)” (
)
■
■
To turn off power
Press
. This will turn off power and cause the power lamp to go out.
Sleep State (Network Standby)
If the printer is connected to a computer over a USB or wireless LAN connection, it will
automatically enter a sleep state after about six minutes of non-operation. This will cause
the power lamp color to change from green to orange. This indicates that the printer is in
network standby.
When a print operation is executed on the computer, the printer will automatically recover
and start printing.
• Auto Power off does not work while the printer is in network standby.
Auto Power Off
If the printer is not connected to a computer over a USB or wireless LAN connection,
Auto Power Off will turn off printer power after about six minutes of non operation.
When you need to use the printer again, press
.
