Character Spacing
Narrow
Narrow
Block Length
Auto
Auto
Mirror Printing
Normal
Normal
Proportional Spacing
On
On
Smoothing
On
On
Block Spacing
Narrow
Narrow
Auto Feed
Long
Long
Tape Length
Auto
Auto
Block Alignment
****(Left)
****(Left)
Default Font
Retained Sans-Serif
Insert/Overwrite Retained
Insert
Contrast (32 levels)
Retained
Level 17
Item
Power
On
Reset
Density (5 levels)
Retained
Level 3
Sound
Retained On
Language
Retained
English
cm/inch
Retained
cm
Initializing the Label Printer
If you experience serious malfunction of the label printer or if operation fails completely, try performing the following operation to initialize the printer.
Important!
Initializing the label printer deletes all memory contents. Make sure you have a back-up copy of text stored in memory if you need it.
To initialize the label printer
1. Turn power off.
2. Holding down the
,
ESC
, and
ON
keys, turn power back on.
•
This prompt confirms whether or not you want to initialize the label printer.
3. Press
SET
to initialize the label printer or
ESC
to abort the reset operation.
Format Indicator
The following shows how the brackets on either side of the format indicator change to indicate various conditions.
[
■
]: Fixed block length (specified by user)
(
■
]:
Block text too long for fixed block length, but printing will be performed by compressing text.
■
]:
Printed tape length will be longer than specified fixed length because text will not fit within fixed tape length even if its size is reduced 50%.
Tape Length Indicator
The following shows how the brackets on either side of the tape length indicator change to indicate various conditions.
[5.1cm]: Fixed tape length specified by user.
5.1cm]: Printing operation cannot be performed.
Illustrations
Symbols, Dingbats, and Special Characters
●
SYMBOL
