Casio KL-8100 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 50

background image

KL-8100

User’s Guide

Guía del usuario

Instruktionshäfte

Svenska

E S Sw

GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THE UNIT IN THE U.S.A. (not applicable to other areas).

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.

Proper connectors must be used for connection to host computer and/or peripherals in order to meet FCC emission limits.

Cable specified for PC ...... Windows

®

compatible PC to EZ-LABEL PRINTER’

Windows

®

is a registered trademark of Microsoft Corporation.

Declaration of Conformity

Model Number:

KL-8100

Trade Name:

CASIO COMPUTER CO.,LTD.

Responsible party: CASIO, INC.
Address:

570 MT.PLEASANT AVENUE, DOVER, NEW JERSEY 07801

Telephone number: 973-361-5400

This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.

CASIO COMPUTER CO., LTD.

6-2, Hon-machi 1-chome

Shibuya-ku, Tokyo 151-8543, Japan

Important Safety Precautions

Note of the following safety precautions before using the label printer for the first time. Keep these safety precautions and operating instructions on hand for future
reference.

About safety precaution symbols

1
2
3
...
»

Содержание KL-8100



















































Отзывы:

Нет отзывов

Похожие инструкции для KL-8100

Бренд: LAVAZZA Страницы: 22

Бренд: Dash Страницы: 32

Cold Brew Coffee Maker

Бренд: Takeya Страницы: 2

Бренд: Qilive Страницы: 72

Бренд: Calphalon Страницы: 10

ECAM23.21 Series

Бренд: DeLonghi Страницы: 16

Бренд: Tchibo Страницы: 112

Бренд: Flyte Страницы: 20

Бренд: Magister Страницы: 16

Бренд: Sencor Страницы: 12

DAYTONA 1-POWER

Бренд: La Pavoni Страницы: 82

Бренд: RAMTONS Страницы: 4

Бренд: Epson Страницы: 9

Бренд: Canon Страницы: 33

Бренд: Hamilton Beach Страницы: 24

Бренд: Hamilton Beach Страницы: 24

Бренд: Hamilton Beach Страницы: 16

BrewStation 47701

Бренд: Hamilton Beach Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды