2-49
You can convert from any unit in a category to any other unit in the same category.
• Attempting to convert from a unit in one category (such as “AREA”) to a unit in another
category (such as “TIME”) results in a Conversion ERROR.
• See the “Unit Conversion Command List” (page 2-50) for information about the units included
in each category.
I
Performing a Unit Conversion Calculation
[OPTN]
-
[CONV]
Input the value you are converting from and the conversion commands using the syntax shown
below to perform a unit conversion calculation.
{value converting from}{conversion command 1}
{conversion command 2}
• Use {conversion command 1} to specify the unit being converted from and {conversion
command 2} to specify the unit being converted to.
•
is a command that links the two conversion commands. This command is always available
at
(
) of the Conversion menu.
• Real numbers or a list that contains real number elements only can be used as the value
being converted from. When values being converted from are input into a list (or when list
memory is specified), conversion calculation is performed for each element in the list and
calculation results are returned in list format (ListAns screen).
• A complex number cannot be used as a value to be converted from. An error occurs if even
a single element of a list being used as the value being converted from contains a complex
number.
Example 1 To convert 50cm to inches
D?
*
(
E
)
(CONV)*
(LENG)
D
(cm)
(
)
(LENG)
C
A
(in)
U
* fx-7400G
II
:
(CONV)
Example 2 To convert {175, 162, 180} centimeters to feet
({)
@FD@EA
@G?
(})
*
(
E
)
(CONV)*
(AREA)
A
(m
2
)
(
)
(AREA)
B
(ha)
U
* fx-7400G
II
:
(CONV)
Содержание FX-7400GII
Страница 337: ...E CON2 Application ...