E-45
(3) After making sure the function is the way you want, press
=
.
• This displays the start value input screen.
• If the initial value is not 1, press
1
to specify the initial start
value for this example.
(4) After specifying the start value, press
=
.
• This displays the end value input screen.
• Specify the end value.
(5) After specifying the end value, press
=
.
• This displays the step value input screen.
• Specify the step value.
• For details about specifying the start, end, and step values,
see “Start, End, and Step Value Rules”.
(6) After specifying the step value, press
=
.
• Pressing the
A
key returns to the function editor screen.
k
Supported Function Types
• Except for the X variable, other variables (A, B, C, D, Y) and
independent memory (M) are all treated as values (the current
variable assigned to the variable or stored in independent memory).
• Only variable X can be used as the variable of a function.
• The coordinate conversion (Pol, Rec) functions cannot be used
for a number table generation function.
• Note that the number table generation operation causes the
contents of variable X to be changed.
Indicates the initial default end
value of 5.
Indicates the initial default step
value of 1.
Indicates the initial default start
value of 1.
