E-44
k
Solution Display
After inputting and registering values on the coefficient editor screen,
press
=
to display the solution(s) for the equation.
• Each press of
=
displays the next solution, if there is one. Pressing
=
while the final solution is displayed returns to the coefficient
editor screen.
• In the case of simultaneous linear equations, you can use
f
and
c
to switch the display between the solutions for X and Y (and
Z).
• When there are multiple solutions for a quadratic or cubic equation,
you can use the
f
and
c
keys to scroll the display between X
1
,
X
2
, and X
3
. The actual number of solutions depends on the
equation.
• Pressing
A
while a solution is displayed will return to the coefficient
editor screen.
• The display format of solutions is in accordance with the input/
output format and complex number display format settings of the
calculator’s setup screen.
• Note that you cannot transform values to engineering notation while
an equation solution is displayed.
Appendix
Equation Calculation: <#066> to <#070>
Generating a Number Table
from a Function
(TABLE)
All calculations in this section are performed in the TABLE Mode
(
N
4
).
k
Configuring a Number Table Generation
Function
The procedure below configures the number table generation
function with the following settings.
Function:
f
(
x
) =
x
2
+
Start Value: 1, End Value: 5, Step Value: 1
LINE
(1) Press
N
4
(TABLE).
(2) Input the function.
1
2
