– 37 –
DT-X200/DT-X8
19. 2D Scanner Dust Check
Note:
This test is not required for the Full Range model.
No.
Operation
Display
Test Details
1
Select “[8].2D Scanner Dust
Check” from All Test MENU-3
screen.
Take a picture of white paper
without taint by pressing the
Center Trigger key.
Check if any foreign substances
are included in the captured
image.
If nothing is found or the included
substance is small (OK):
Press the “1” key.
(Use the following criteria for
determining.)
If the substance is large (Failure):
Press the “0” key.
Pressing the “1” or “0” key returns
you to the Menu screen.
[Criteria for foreign substances]
20. 2D Scanner Barcode Read
No.
Operation
Display
Test Details
1
Select “Start” - “Programs” -
“Utility” - “Image Scanner Demo”.
Six menu buttons (Scan
barcode, Scan several
barcodes, Capture image, Scan
target barcode, Challenge
scanning speed and Setting)
are displayed.
Click the menu button “3
Capture image” and press
the Trigger key to capture an
image.
The read image is displayed on
the screen.
Check that the image is read
correctly.
Click the “Exit” button at the
bottom left to close the screen.
Perform the test for the button
“1 Scan barcode” to check that
the read data is displayed on the
screen.
Содержание DT-X8 Series
Страница 1: ...SERVICE MANUAL HANDHELD TERMINAL Ver 4 Jun 2017 DT X200 APR 2015 DT X8 For China Only APR 2015...
Страница 72: ...69 DT X200 DT X8 7 1 2 UPPER CASE UNIT S1 S1 19 22 16 18 17 23 20 21 15 6 15 3 15 4 15 2 15 5 15 1 10 15...
Страница 76: ...73 DT X200 DT X8 7 1 6 BUNDLED ITEMS TOOLS 75 80 81 77 78 82 79 76...
