manualshive.com logo in svg

Casio DT-X8 Series, Руководство по обслуживанию, Страница: 47 / 85

Поделиться
Скачать
Casio DT-X8 Series Скачать руководство пользователя страница 47

– 44 –

DT-X200/DT-X8

5-4-7.  Voltage measurement

1.  Low Voltage Detection

1.  Preparation

(1) Open the Battery Cover and remove the battery pack.
(2) Connect equipment as shown below.
(3) Set the voltage control of the DC power supply at minimum position and turn ON the power.

DC power supply

DC ammeter

DC voltmeter

Diode (IF=3.0A, Max.)

Keep press down the Battery Cover switch.

2.  Operation

No.

Operation

Display

Test Details

1

Select 

“

[3].Low Voltage 

Detection” from All Test MENU-
3 screen.

Adjust the DC power supply so 
that the DC voltmeter reads 3.2 V. 
Then, press the 

“

Enter” key.

Adjust the DC power supply so 
that the DC voltmeter reads 3.9 V. 

 

DT-X200/DT-X8 is turned ON.

Automatically judges if XINHIN0 is 
not generated.

Automatically shuts off .

If XINHIN0 is not generated (OK):
The screen returns to the Menu 
screen.

If  XINHIN0 is generated (Failure):
An error indication is displayed.
->

 

Pressing the “Enter” key 
returns you to the Menu 
screen.

Содержание DT-X8 Series






















































































Отзывы:

Нет отзывов