– 36 –
DT-X200/DT-X8
16. Audio (Rec & Rep)
No.
Operation
Display
Test Details
1
Select
“
[4].Audio(Rec&Rep)”
from All Test MENU-3 screen.
Talk over the DT-X200/DT-X8
microphone.
Sound input from the DT-X200/DT-
X8 microphone is output from the
speaker.
The judgment screen appears.
If sound is output (OK):
Press the “1” key.
If sound is not output (Failure):
Press the “0” key.
Pressing the “1” or “ 0” key returns
you to the Menu screen.
17. Vibrator
No.
Operation
Display
Test Details
1
Select
“
[8].Vibrator” from All
Test MENU-4 screen.
The vibrator vibrates for approx. 3
seconds.
The judgment screen appears.
If vibrator is activated properly (OK):
Press the “1” key.
If vibrator is not activated (Failure):
Press the “0” key.
Pressing the “1” or “0” key returns
you to the Menu screen.
18. Laser Barcode Read (*1D Laser model only)
Note:
When the MAIN-UNIT or LASER UNIT is replaced with a new one, perform Laser
Calibration before stating this test.
No.
Operation
Display
Test Details
1
Select “Start” - “Programs” -
“Utility” - “Barcode Demo”.
Five menu buttons (Scan
barcode, Scan several
barcodes, Scan barcode with
focus, Challenge scanning
Speed and Setting) are
displayed.
Click the menu button “1 Scan
barcode” and press the Trigger
key to read a barcode.
The read data is displayed on the
screen.
Check that the barcode is read
correctly.
Click the “Exit” button at the
bottom left to close the screen.
Note:
In this screen, you can change
the scan mode and swing control,
as required. Further, by pressing
the “Change” button at the bottom
right, you can change the gain
mode and decode level.
Содержание DT-X8 Series
Страница 1: ...SERVICE MANUAL HANDHELD TERMINAL Ver 4 Jun 2017 DT X200 APR 2015 DT X8 For China Only APR 2015...
Страница 72: ...69 DT X200 DT X8 7 1 2 UPPER CASE UNIT S1 S1 19 22 16 18 17 23 20 21 15 6 15 3 15 4 15 2 15 5 15 1 10 15...
Страница 76: ...73 DT X200 DT X8 7 1 6 BUNDLED ITEMS TOOLS 75 80 81 77 78 82 79 76...
