Casio DT-X100 Series, Руководство по обслуживанию

Страница: 51 / 82

— 48 —
5-4-7. Speaker
No Operation Display Test Details
1
Select [Speaker].

The volume changes from small,
medium to large at frequency of 3kHz.

The volume changes from small,
medium to large at frequency of
10kHz.
The sound time for each volume is 0.3
sec. and the sound is repeated for 4
times.
If sound from the speaker is correct: OK
Press the “1” key.
If sound from the speaker is incorrect:
Failure
Press the “0” key.
Pressing “1” or “0” returns you to the
Menu screen.
5-4-8. Vibrator
No Operation Display Test Details
1
Select [Vibrator]. After operating Vibrator for 3 seconds,
the result screen is displayed.
If Vibrator vibrates: OK
Press the “1” key.
If Vibrator do not vibrate: Failure
Press the “0” key.
Pressing “1” or “0” returns you to the
Menu screen.
5-4-9. Charge LED
No Operation Display Test Details
1
Set DT-X100to HA-
F60IO.
(Attention)
Use a battery not fully
charge
Select [Charge LED].
Check that a Charge LED lights in orange
or green.
If LED lights properly: OK
Press the “1” key.
If LED does not light: Failure
Press the “0” key.
Pressing “1” or “0” returns you to the
Menu screen.