Casio CT-X8000IN, Руководство пользователя

Страница: 22 / 147

EN-21
Playing on the Keyboard
1.
Perform steps 1 through 3 under “To split the
keyboard between two tones (Split)” (page
EN-19).
2.
Perform the procedure below to layer two
UPPER part tones.
(1) Press dq
UPPER LAYER
and confirm that the [U2]
indicator is displayed.
(2) Select the tone you want to assign to UPPER 2.
3.
Perform the procedure below to layer two
LOWER part tones.
(1) Long-press dq UPPER LAYER until the [L2]
indicator appears.
This displays an indicator mark next to [LOWER
LAYER].
(2) Select the tone you want to assign to LOWER 2.
4.
Play something on the keyboard.
• For information about how to change the tone
assigned to each part, see “To change the tones
assigned to each split/layer part” (page EN-21).
• When using split and layer together, the UPPER 2 part is
called the “upper layer”, while the LOWER 2 part is called
the “lower layer”.
• To disable the upper layer only after performing steps 1
through 3 of the procedure above, press dq
UPPER
LAYER
and confirm that the [U2] indicator is not displayed.
To disable the lower layer only, long-press dq
UPPER
LAYER
(LOWER LAYER) until the [L2] indicator
disappears ([LOWER LAYER] indicator mark also
disappears).
• There will be an indicator mark next to [LOWER LAYER]
while the lower layer is enabled, regardless of whether the
keyboard is split. The mark disappears when the lower
layer is disabled.
• Pressing dp
SPLIT
after performing steps 1 through 3
above disables the split, so the [L1] and [L2] indicators
disappear, and the keyboard becomes layered with the
UPPER parts (UPPER 1 and UPPER 2) only.
1.
Press 5
TONE
.
This displays (tone indicator).
2.
Long-press 5
TONE
until moves to the
right of the keyboard part indicator (page
EN-19).
• Repeat this operation as many times as required to
move to the right of the keyboard part indicator
(U1, U2, L1, L2) of the part (UPPER 1, LOWER 1,
UPPER 2, LOWER 2) whose tone setting you want to
change.
3.
Change the tone of the keyboard part you
selected in step 2.
• Repeat steps 2 and 3 above for each of the keyboard
parts whose tone setting you want to change.
To use split and layer together
Displayed
To change the tones assigned to each split/
layer part
CT-X9000_8000IN_EN.book 21 ページ ２０１８年４月１２日 木曜日 午後１時８分