EN-39
Playing a Built-in Song or a Song on a USB Flash Drive (Song Bank Mode)
1.
In the Song Bank mode, press
5
TONE
.
This displays
(tone indicator).
(song bank
indicator) will also remain on the display.
2.
Use the
bm
number keys,
bn
[–] and [+], or the
bl
dial to select the number of the tone you
want to assign to keyboard play.
• While
is displayed, you can perform the split and/or
layer tone selection operation. For more information,
see “Selecting a Tone” (page EN-18).
• To change a tone number you selected using the procedure
above, press
7
SONG BANK
. This causes
to
disappear, leaving only
displayed.
Perform the procedure under “To configure function settings
with the
bk
FUNCTION
button” (page EN-107) and configure
the following setting: Song Volume (Song Vol) (page EN-110).
To loop a range of measures in a song, you need to specify
the start measure and end measure of the section you want to
repeat.
1.
If there is no indicator mark next to [REPEAT],
press
bp
REPEAT
to display it.
2.
Perform steps 1, 2, and 3 under “To select a
single built-in song for playback” (page EN-38)
to start song playback.
3.
When playback reaches the beginning of the
section you want to loop, press
bq
A-B
.
This will make the beginning of the measure that is
playing when you press
bq
A-B
the beginning of the
loop, and cause the indicator mark next to [A-B] to start
to flash.
4.
When playback reaches the end of the section
you want to repeat, press
bq
A-B
again.
This will make the end of the measure that is playing
when you press
bq
A-B
the end of the loop, and cause
the indicator mark next to [A-B] to stop flashing.
5.
To return to normal playback, press
bq
A-B
.
This causes the indicator mark next to [A-B] to disappear.
You can mute one of the hand parts of a song for playback.
Then you can practice by playing the muted part on the
keyboard. The following types of songs can be used for such
practice: built-in songs,
*
or CMF format (one type of CASIO
MIDI file) songs
*
stored on a USB flash drive.
*
These songs have part channel information (page EN-40).
1.
Press
7
SONG BANK
.
2.
Use the
bm
number keys,
bn
[–] and [+], or the
bl
dial to select a song number.
3.
Press
ck
PLAY/STOP
to start song playback.
To select a tone for keyboard play in the
Song Bank mode
To adjust the balance between song and
keyboard volume
Looping Playback of Specific
Song Measures (A-B Repeat)
To loop a specific phrase
Start
End
These measures are repeated.
Playing Back with One Hand’s
Part Muted
To play back with one hand’s part muted
Flashing
Displayed
CT-X9000_8000IN_EN.book 39 ページ ２０１８年４月１２日 木曜日 午後１時８分
