EN-67
Registering and Restoring a Setup (Registration)
1.
As required, press
cn
FREEZE
to toggle the
freeze function between on and off.
• The indicator lamp is lit when the function is on, and
unlit when it is off.
• For details about the freeze function, see “Freeze
Function” below.
2.
Use
co
BANK
to select the bank that contains
the setup you want to recall.
3.
Press one of the
cs
REGISTRATION
buttons
([1] to [8]) to select the area whose setup you
want to recall.
This causes the Digital Keyboard’s settings to change in
accordance with the setup you recalled.
Recalling a registered setup normally overwrites all of the
settings shown under “Registration Setting Items” (page
EN-66).
You can also use the freeze function to specify particular
settings that should not be overwritten when a setup
registration is recalled.
Perform the procedure under “To configure function settings
with the
bk
FUNCTION
button” (page EN-107) and enable or
disable the items on each sub-menu that appears when you
perform the following operation: Registration Memory (Reg
Mem)
3
Registration Memory Freeze Target (RMFrzTgt)
(page EN-111).
Setting items that can be specified are shown below.
• Under initial default settings, Rhythm and Tempo are on
while all other settings are off.
Recalling a Registered Setup
To recall a setup
Bank number
Bank number
Area number
Freeze Function
Display
Setting that is not changed when a
setup is recalled
Rhythm
Rhythm Number, ACCOMP on/off,
Synchro start/stop status
Tempo
Tempo
Tone
Tone number, Layer (on/off), Split (on/
off), Octave Shift, KEYBOARD part
group mixer settings
Split Pt
Split Point, Lower Point, Chord Point,
Chord Input Priority Mode
AHar/Arp
Auto Harmonize/Arpeggiator
Trans.
Transpose
Scale
Scales
Touch
Touch Response
Effect
Effect type (Reverb, Chorus, Delay on/
off)
PartTune
Coarse Tune, Fine Tune
Phr Pad
Phrase Pad
Cntrller
Setting items included under Controller
(Cntrller) in the “Function Setting Item
List” (page EN-108).
CT-X9000_8000IN_EN.book 67 ページ ２０１８年４月１２日 木曜日 午後１時８分
