EN-48
Config
u
ring Digital Piano Settings
Scene >Ent
Scene parameters
Write >Ent
Save user scene.
–
Saving a User Scene (page
EN-27)
Clear >Ent
Clear user scene.
–
Deleting a User Scene (page
EN-28)
General >Ent
Other Digital Piano parameters
LCD Contrast
Digital Piano display contrast
(See the page
to the right.)
Adjusting Display Contrast
(page EN-7)
Auto Resume
Digital Piano setup backup. When this setting is
enabled, the Digital Piano remembers its current
settings when it is turned off, and restores them
the next time power is turned on.
• The settings below are not remembered.
Song part (LR) selection, Operation lock, Local
Control, Concert Play song mode (LISTEN,
PLAY), Concert Play song tempo, Speaker Out,
Master EQ
Off
(Disabled),
On
(Enabled)
–
Auto Power Off
Auto Power Off
(See the page
to the right.)
Operation Lock
Operation lock. Enable this setting when you want
to protect against unintentional button operations.
When this setting is turned on, the Digital Piano’s
buttons (except for the
P
(Power) button and
buttons required for unlock) are locked, so no
operation can be performed.
Off
(Disabled),
On
(Enabled)
–
*
Half Pedal Pos.
Half pedal position
(See the page
to the right.)
To adjust the half pedal
trigger position (page EN-12)
Headphone Mode
Headphone mode. The Headphone Mode
automatically performs timbre compensation
while headphones are being used to reproduce the
natural expanse of sound that reaches the ears
when an acoustic piano is played. The initial
default setting is “On”.
• On: Enabled; Off: Disabled
Off
(Disabled),
On
(Enabled)
–
Volume Sync EQ
Volume sync equalizer. Automatically performs
timbre compensation in accordance with the
volume level. This feature ensures that low range
and/or high range sounds are easier to hear, even
at low volume levels. The initial default setting is
“Normal”.
• Off: Compensation disabled;
Weak: Weak compensation;
Normal: Normal compensation;
Strong: Strong compensation
• This function is intended for use with sound
output by the Digital Piano’s speakers.
• Compensation is not performed while the
Master EQ setting is Line Out.
Off
(Disabled),
Weak,
Normal,
Strong
–
*
Speaker Out
Speaker Out. Specifies whether sound should be
output from the built-in speakers.
•
Auto: Enables built-in speaker output.
Speaker output is disabled while
headphones are connected.
• Off: Disables built-in speaker output.
Auto,
Off
(Disabled)
–
Display Text
Description
Settings
Go here for more
information
