Case FARMALL 105U EP, Руководство по обслуживанию

Страница: 22 / 61

Engine - Engine and crankcase
28. On the right-hand side, remove the guard (1) on the
starter motor (2) . Disconnect the starter cable and
battery isolator. Disconnect the alternator and the re-
spective connecting cable. Release all of the wiring
from the fixing clamps.
29. Loosen the fastening (3) . Remove the ground con-
nection cable. Remove starter
WLAPL4S10C135A
25
30. On the FTP interface cable (1) with the motor, discon-
nect all of the connections (2) , except for the connec-
tions on the maxi fuse compartment and on the glow
plug controller. After you cut the fixing clamps, recon-
nect the cable on the front near the controller
(5) .
31. On the main engine cable (3) , disconnect the con-
nectors from the controller (4) including the maxi fuse
compartment, switches, and sensors positioned on
the engine. After you cut the fixing clamps, move the
cable onto the rear of the engine at the height of the
right-hand ladder.
WLAPL4S10C137A
26
32. On the left-hand side, disconnect the cab power ca-
ble connector (1) . Release the connector from the
clamps. Move the connector onto the maxi fuse com-
partment.
33. Remove the bracket (2) of the cab electrical connec-
tors, cab electrical supply, and cup filter (3) . Discon-
nect the tubing that joins the cup filter to the mechan-
ical priming pump on the sediment filter.
WLAPL4S10C139A
27
34. Hook the rear part of the engine to a hoist using chains
or ropes for lifting. (Apply two eyebolts, one to the
right-hand side and one to the left-hand side, on the
upper part of the flange containing the flywheel.) Po-
sition a fixed jack stand
(2) under the clutch case (1)
near the engine attachment flanging.
WLAPL4S10C129A
28
47841819 24/02/2015
10.1 [10.001] / 11