Case FARMALL 105U EP, Руководство по обслуживанию

Страница: 20 / 61

Engine - Engine and crankcase
A small misalignment of the axis of the decoupler with respect to the axis of the turbine outlet (3) would produce an
adjustment that would no longer be longitudinal, in line with the direction of the tractor. This small misalignment would
produce an abnormal transversal adjustment, which would affect its durability.
18. Disconnect all of the filter sensors. Loosen the clamp
(4) . Loosen the four screws (5) that secure the filter to
the bottom support to remove the filter together with
the sensors and heat shields.
WLAPL4S10C122A
17
ATTENTION: Only if you have to work on the parts under-
neath the DPF filter support, it is advisable to remove the
support.
When possible, you should remove the upper part
(1) and
the right-hand part (2) as a block. To do this, remove the
retaining screws (3) on the right-hand side of the engine.
(These screws work on a vertical slot, so that the support
(2) can have various height positions.) Before disassem-
bly, it is necessary to take some references of the position
on the engine, so that you can return the block to the orig-
inal position during reassembly.
WLAPL4S10C123A
18
19. To remove the rear shield, loosen the two screws that
fix the support (4) to the support (1) . To remove the
left-hand support (5) , loosen the two retaining screws
on the left-hand bracket (1) . Retrieve the respective
centering bushings.
WLAPL4S10C124A
19
20. Disconnect the steering control lines (1) and (2) . Dis-
connect the oil supply line to the distributor (3) .
Remove the fastening (4) of the engine lines.
WLAPL4S10C125A
20
47841819 24/02/2015
10.1 [10.001] / 9