Case FARMALL 105U EP, Руководство по обслуживанию

Страница: 21 / 61

Engine - Engine and crankcase
21. Disconnect the exhaust pipe (2) of the power-steering
control valve. Disconnect the power supply line (1) of
the transmission control valve.
Then remove the filter
(3) together with the support.
WLAPL4S10C126A
21
22. Disconnect the inlet pipes from the pump (1) . Discon-
nect the inlet pipe (2) from the transmission oil filter,
at the height of the cab support.
Disconnect the supply line to the lift
(3) .
Disconnect the supply lines (5) to the lift and to the
power-steering anti-cavitation tank (6) .
23. Remove the filter assembly (4) together with the tank
(6) , support, and parts of the tubing that were previ-
ously disconnected.
24. Remove the power-steering pump assembly from the
high-pressure circuit.
WLAPL4S10C127A
22
25. Remove the tubes of the heat exchanger (1) , differen-
tial lock (3) , and (if applicable) front braking assembly
(4) .
26. Release the lines that were previously disconnected
from the supports, brackets, and clamps secured to
the engine. Do the same for the lines directed to the
steering cylinder
(2) .
WLAPL4S10C128A
23
27. On the right-hand side of the engine, disconnect the
cab heating lines (1) . Disconnect the tubing from the
expansion tank that is inserted on the engine sleeve
(3) . Loosen the clamps. On the engine, disconnect
the connecting rubber sleeves (4) of the radiator.
WLAPL4S10C134A
24
47841819 24/02/2015
10.1 [10.001] / 10