Cascade CMX Pro, Руководство пользователя

Страница: 15 / 32

Page | 16
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
9) Tighten with the provided Hex key and multi tool.
SEAT SEAT SEAT SEAT POST POST POST POST AND SEAT ASSEMBLY AND SEAT ASSEMBLY AND SEAT ASSEMBLY AND SEAT ASSEMBLY
1) Loosen and then pull the T handle on the frame while
inserting the seat post as shown. Tighten the T handle.
2) Loosen and then pull down the T handle on the seat post
while inserting the seat slider assembly as shown.
Tighten the T handle.
PEDALS PEDALS PEDALS PEDALS
1) The pedals are marked as if you are seated
on the bike, “R” for right, and “L” for left
2) Carefully thread the right pedal into the
crank arm with your fingers - do
do do
do not
not not
not c
cc
crrrross
oss oss
oss
th
th th
thrrrread
ead ead
ead the
the the
the pedal
pedal pedal
pedal in
in in
in the
the the
the c
cc
crrrrank
ank ank
ank arm!
arm! arm!
arm!
3) Use the wrench tool to strongly tighten the
pedal. Torque pedals to 47 Nm (35 ft-lb)
4)
4) 4)
4) Repeat this step for the left pedal - NOTE: The LEFT PEDAL
NOTE: The LEFT PEDAL NOTE: The LEFT PEDAL
NOTE: The LEFT PEDAL
is is is is REVERSE REVERSE REVERSE REVERSE THREADED THREADED THREADED THREADED
WATER BOTTLE HOLDER
WATER BOTTLE HOLDER WATER BOTTLE HOLDER
WATER BOTTLE HOLDERS
S S
S
1) To install the water bottle holders to the side of the frame
near the flywheel, insert the two screws with washers as
shown.
2) Tighten the screws with a Hex key to secure the holders to the
frame.