the hub area with a brush or blow it clean,
with an air compressor air.
7. The Active Guard should be retracted
manually only for making special cuts such
as pocket cuts and compound cuts. Always
raise Active Guard by Active Guard Handle
lever. As soon as blade touches the mate-
rial, release the handle of the Active Guard,
For all other sawing, the Active Guard
should operate automatically.
8. Always observe that the Active Guard is
covering the blade before placing saw
down on bench or floor after use. An unpro-
tected, coasting blade will cause the saw
to jump, cutting whatever is in its path. Be
aware of the time it takes for the blade to
stop after switch is released.
9. Never hold piece being cut in your hands
or across your leg. It is important to place
material being cut in a bench vice to mini-
mize the risk of hurting yourself.
10. Always hold the saw by the insulated grip-
ping surface when performing an operation
where the cutting tool may make contact
with wiring or its own cord.
11. When ripping always use a rip fence or
straight edge guide. This improves ac-
curacy of cut and reduces the chance for
blade bending.
12. Do not use any Carbide blades. These
blades are specially designed for this
machine.
13. Never use damaged or incurred blade
washers or bolts. The blade washers,
flanges and bolt were specially designed
for your saw, for optimum performance and
safety of operation.
14. Do not run the saw while carrying it in your
hand.
WARNING
• This Dual Blade Saw uses specially de-
signed blades and no other type of blades
should ever be used on it .Other types of
blade will not operate safely in this saw &
could result in serious injury,
• If the blades come in contact with the work-
place before they reach full speed, it could
cause the saw to kickback towards you
resulting in serious injury.
• Always make sure both blades enter into
the workplace at the same time. Entering
with only one blade will cause unexpected
kickback, risking serious injury.
PREVENTION OF KICKBACK
Kickback is the result of misuse and / or incor-
rect product operation or conditions and can
be avoided by taking proper precautions given
below:
• Maintain a firm grip with both hands on the
saw and position your body and arm to al-
low you to resist, kickback forces which can
be controlled by the operator.
• Support large panels to minimize the risk of
blade pinching and kickback. Large panels
tend to sag under their own weight. Sup-
ports must be placed under the panel on
both sides near the line of cut and near the
edge of panel.
• Use extra caution when making a “Pocket
Cut” or “Chasing” into existing walls or other
blind areas, you might cut objects that can
cause kickback.
ADDITIONAL INSTRUCTIONS FOR SAFE
OPERATION
Be sure to read and understand all instruc-
tions. Failure to follow all instruction listed be-
low may result in electric shock, fire or serious
personal injury.
1. Know your power tool. Read operator’s
manual carefully, and learn the applica-
tions and limitations, as well as the specific
potential hazards related to this tool. Fol-
lowing this rule reduce the risk of electric
shock, fire, or serious personal injury.
2. Always wear safety glasses or eye shields
when using this saw. Everyday eyeglasses
have only impact resistant lenses; they are
not safety glasses. Following this rule will
reduce the risk of serious injury.
3. Always protect your lungs. Wear a face-
mask if the operation is dusty. Following
this rule will reduce the risk of serious
personal injury.
4. Always protect your hearing. Wear ear
protection during extended period of opera-
tion. Following this rule will reduce the risk
of serious personal injury.
5. Always inspect the tools cords periodically
and if damaged have it repaired at your
nearest Service Center or other Authorized
Service Facility. Always be aware of the
Содержание DBS900
Страница 10: ......
