Casals DBS900, Инструкция по эксплуатации

Страница: 4 / 15

Caution! Before using this product please read
this manual and all instructions and follow all
its safety rules and operating instructions.
CONTENTS:
1. Data Sheet
2. General safety rules for power tool &
symbols
3. Specific safety rules for Dual Blade saw
4. Know you Dual Blade Saw
5. Operating instruction
6. Instructions for Cross Sectional Cutting
7. Removal of used twin blades
8. Mounting replacement blades
9. Dual Blades
10. Accessories
11. Maintenance
12. Troubleshooting
STANDARD ACCESSORIES SUPPLIED
WITH THE MACHINE:
1. Blade guard (mounted)
2. Assist handle
3. Lubrication unit (mounted)
4. Box wax tube (containing 10 tubes)
5. 2 Blades “universal” carbides (mounted
refer to section TWINS BLADES)
1. DATA SHEET
2. GENERAL SAFETY INSTRUC-
TIONS
SYMBOLS
Important! Some of the following symbols
may be used on your tool. Please study them
and learn their meaning. Proper interpretation
of these symbols will allow you to operate it
better and safer.
Wear eye and ear protectors
Faulty and / or discarded electric appliances
have to be collected at the appropriate recy-
cling locations.
Safety Instructions
Instructions for tool operation. Current valid
regulation must be observed. Damaged or
deformed blades may NOT be used. It is not
permitted to solder or weld split blades or to
solder in support parts with hard metal teeth.
Do not apply pressure while cutting any mate-
rial.
Packing/unpacking Tools
Tools must be packed and unpacked with
extra care and caution.
Before use
Manual Read the manual before use
Ear protection Always wear ear protection
Tool Check the blades /Check the
machine setting
Grinding/maintenance
To maintain quality and safety it is necessary to
keep your tools clean at all times.
3. SPECIFIC SAFETY INSTRUC-
TIONS
Always keep hands away from cutting area
and blade.
1. Always hold the Saw with firmly with both
hands before cutting.
2. Always keep your body positioned to either
side of the saw blade and not in line with
the saw blade.
3. Hold the saw firmly to prevent loss of
control.
4. Do not attempt to remove cut material when
blade is moving.
5. Always check that the Active Guard is clos-
ing correctly. Do not operate saw if Active
Guard does not move freely and closes in-
stantly. Never clamp or tie the Active Guard.
Raise the Active Guard with the Retracting
handle and make sure it moves freely and
does not touch the blade or any other part,
in all angles and depths of cut.
6. Check the operation and condition of active
guard spring, if the guard and the spring
are not operating properly, they must be
serviced before use. Active Guard may
operate sluggishly due to damaged parts
or gummy deposits or a build up of debris.
Unplug from power source. Remove the
blade, clean the upper Active Guards and