a power tool. Do not use a power tool
while you are tired or under the influ-
ence of drugs, alcohol or medication. A
moment of inattention/distraction while
operating power tools may result in seri-
ous personal injury.
b. Use safety equipment. Always wear
eye protection. Safety equipment such
as dust mask, non-skid safety shoes,
hardhat, or hearing protection used
for appropriate conditions will reduce
personal injuries.
c. Avoid accidental starting. Ensure the
switch is in the off-position before plug-
ging in. Carrying power tools with your
finger on the switch or plugging on the
power tools that have the switch on invite
accidents.
d. Remove any adjusting key or wrench be-
fore turning the power tool on. A wrench
or a key left attached to a rotating part
of the power tool may result in personal
injury.
e. Do not overreach .Keep proper footing
and balance at all times. This enables
better control of the power tool in unex-
pected situations.
f. Dress properly. Do not wear loose cloth-
ing or jewellery. Keep your hair, clothing
and gloves away from moving parts.
Loose clothes, jewellery or long hair can
be caught in moving parts.
g. If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of these devices can reduce
dust related hazards.
h. This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use
of the appliance by a person responsible
for their safety.
i. Children should be supervised to ensure
they do not play with the appliance.
4. Power tool use and care
a. Do not force the power tool. Use the
correct power tool for your application,
The correct power tool will do the job
better and safer at the rate for which it
was designed.
b. Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with
the switch is dangerous and must be
repaired.
c. Disconnect the plug from the power
source and/or the battery changing ac-
cessories, or storing power tools. Such
preventive safety measure reduce the
risk of starting the power tool acciden-
tally.
d. Store idle power tools out of reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands
of untrained users.
e. Maintain power tools Check for misalign-
ment or binding of moving parts, break-
age of parts and any other conditions
that may affect the power tools operation.
If damaged, have the power repaired
before use. Many accidents are caused
by poorly maintained power tools.
f. Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and easier to control.
g. Use the power tool, accessories and tool
bits etc. in accordance with these instruc-
tions and in the manner intended for
the particular type of power tool, taking
into account the working conditions and
the work to be performed. Use of power
tool for operations different from those
intended could result in a hazardous
situation.
5. Service
Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Содержание DBS900
Страница 10: ......
