background image

11

OUTSIDE USA - SECONDARY SUPPORT 

 CANOPY INSTALLATION

Step 5.

 Attach the canopy to the crossbar mounting bracket behind the

installed outlet adaptor plate with three of the 8-32 x 2

1

/

2

 long canopy

screws and lock washers provided with your Casablanca fan. Hand tighten
until snug against the ceiling.
Note: On sloped ceilings, align the canopy opening toward the top or peak
of the room.

OUTSIDE USA - SECONDARY SUPPORT 

 HANGING THE FAN

Step 7.

 To hang the fan body in the canopy, hold the fan

body firmly and insert the nylon ball into the canopy open-
ing. Rotate fan body until slot on nylon ball fits into pin
opposite canopy opening.

Step 8.

  Attach the fan wires to the ceiling outlet box wiring

by twisting the bare ends of the wiring together:

FAN

CABLE

CANOPY

OUTLET

BOX

CABLE

SPRING

LOCK

Step 6.

 Attach the spring

lock hook to the fan cable
by depressing the spring
lock and clipping onto the
loop at the end.

CANOPY

SCREW

CANOPY

LOCK

WASHER

FEED OUTLET BOX

CABLE AND OUTLET

BOX WIRES THROUGH

CANOPY OPENING

FAN

CABLE

SPRING

LOCK HOOK

BALL

SLOT

PIN

RETURN TO YOUR FAN INSTALLATION INSTRUCTIONS AND
CONTINUE WITH THE ‘CANOPY HATCH INSTALLATION’
SECTION ON PAGE 7.

• White wire from fan to white NEUTRAL wire in ceiling out-

let box.

• Black wire and blue wire (3-Speed fan only) from fan to

black (or red) POWER wire in ceiling outlet box.

• Green leads from crossbar mounting bracket and fan to

grounding conductor of power source.

Secure by threading on the wire nuts provided with the fan.

OUTSIDE USA - SECONDARY SUPPORT 

 COMPLETING INSTALLATION

Step 9.

 Attach the fan cable to outlet box cable with the

spring lock hook. Make sure the spring lock is tightly closed.

Step 10.

 Tuck the wires into the canopy with the wire nuts

pointed upward, so that the white and black wires are on
opposite sides of the canopy and all wires are clear of the
canopy opening.  Tuck the extra cable and screw lock hook
into the canopy.

NOTE:

 International fans and light fixtures are supplied

with plug and socket connectors. Substitute these connectors
for the wire nuts shown throughout this manual.

FAN AND

OUTLET
CABLES

SECURED BY

SPRING

LOCK HOOK

WIRE NUTS

INSTALLED

Содержание General


























Отзывы: