CAS NT-500 Series Скачать руководство пользователя страница 50

Страница: 50 / 66

(7) How to clear ID data

VF Display and use key

Platform

Description

Step 1

Empty

(or item)

Step2

☞

Press the

for 3 seconds.

Step 5

Empty

(or item)

All data of id (0~50) is cleared.

Note. Even though there is an item on the platter, data clearing is performed.

(8) How to print subtotal.

Assume that the current ID code is 10.

VF Display and use key

Platform

Description

Step1

☞

Press the

key.

Step2

☞

Press the

and

key.

Enter ID code “10” .

Step3

☞

Press the

key.

Step 4

☞

Press the

and

key.

Sub total is printed.

Note. If printing is done, the total weight and count of this ID number is set to 0.

The print form is as belows.

- - - - - - - - - - - - - - - - - - -

SUB TOTAL

- - - - - - - - - - - - - - - - - - -

DATE 2001.10.13
TIME                            09:30
ID                                        10
COUNT                              5
TOTAL 350.0kg

Содержание NT-500 Series



































































Результаты поиска

Содержание NT-500 Series

Отзывы:

CAS NT-500 Series, Руководство пользователя, Страница: 50 / 66

Результаты поиска

Содержание NT-500 Series

Отзывы: