7
/
44
You can set each weighing process as a certain P/N.
And you can call certain P/N with pressing this key.
P/N save : Select P/N and Enter key input.
P/N call : P/N + Number key + Enter
Set the SP1 value or Check the current value.
- Press key and enter new set value with keypad, and press enter to save.
Under Print installation, you can print out the “Sub-total data” of current P/N.
Printed Data : Accumulated count and weight of All P/N.
Under Print installation, you can print out the “Grand-total data” of all P/N.
Printed Data : Accumulated count and weight of All P/N.
Set the SP2 value or Check the current value.
- Press key and enter new set value with keypad, and press enter to save.
Set the SP3 value or Check the current value.
- Press key and enter new set value with keypad, and press enter to save.
Set the SP4 value or Check the current value.
- Press key and enter new set value with keypad, and press enter to save.
Manual Printer
- Key input, print output.
Calibration mode
- Digit setting
Whenever pressing “0”key, digit will be change 1, 2, 5, 10, and 50.
1. Modify the set value during setting process.
2. Calibration mode
- Move back to previous step.
3. F-function setting mode
- Change F-function No.
F-function no.(number key) + Clear
directly move
1. Save set value during setting process.
2. Calibration mode
- Save current setting and move to next step.
3. F-Function mode
- Save current F-function setting, and move to next F-function
