CAS CU series, Руководство пользователя

Страница: 32 / 127

33
6.2.2 Cable Connection
1 . Verify the balance display is “STAND-BY”.
2 . Turn off the computer and remove power from
the balance.
3 . Connect the RS-232C cable to the balance.
4 . Connect the RS-232C cable to the computer.
6.2.3 Setting Up the Computer
(leave the balance unplugged)
1
. Turn ON the power to the computer and start
Windows®*.
2
. Click “Start”, choose “Settings”, and
“Control Panel”.
3 . Select “Accessibility Options.”
4 . Verify that there are no check marks for any
items on all five tabs including “General.”
5
. Put a check mark at “Support Serialkey
device” in the “General” tab. This should be
the only check mark on all the tabs of
Accessibility Options unless “Administrative
options” appears in the
“ General” tab.
Put check marks at both the items of
“Administrative options” to maintain the
settings even after restarting Windows®.
6 . Open “Settings”.