CAS CU series Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 127

CAS CU series Скачать руководство пользователя страница 10

11

1. Introduction

CAS UW/UX series of toploading balances are a product of our 80 year history of
developing and manufacturing weighing instruments.

CAS UW/UX series of toploading balances utilize the patented CAS UniBloc
sensor, introduced in 1989, to achieve high performance, fast response, and durability.
Available features include multiple units of measure, piece counting, checkweighing
functions, auto print, and GLP/GMP/ISO output including date and time data from a
built-in clock.
The new series also features CAS’s WindowsDirect communication, requiring no
software installation
to quickly integrate balances with lab or business software. This function eliminates data
input errors and offers extensive flexibility for application development without
compromising compliance or data security.
The UW series balance incorporates a motor-driven built-in calibration weight that can
automatically calibrate sensitivity without the use of external weights.

Read this manual carefully before using this instrument and keep it with the balance for
future reference.

This manual refers to the different types of UW and UX series (UW/UX series) balances
as follows:

H type : UW/UX     H
S type : UW/UX     S
Where :     represents the figure indicating the capacity, H indicates
high resolution and S indicates standard resolution.

The type of balance is classified as “large pan” or “small pan” depending on the capacity.
The small pan models with minimum display of 0.001g come with a standard windbreak.
Accordingly, the models are classified into the following three groups in “4. Installation”.
a. Large pan models: Capacity 2200g or higher
b. Small pan models: Capacity 820g or lower

(minimum display 0.01g)

c. Small pan models: Capacity 820g or lower

(minimum display 0.001g, windbreak standard)

Microsoft® and Windows® are registered trademarks of Microsoft Corporation.
Names of companies and products are trademarks or registered trademarks of the companies.

Copyright 2002 by

ⓒ

CAS CORPORATION, SEOUL KOREA

«
...
8
9
10
11
12
...
»

Содержание CU series
































































































































Отзывы:

Нет отзывов