CAS CI-200 Series Скачать руководство пользователя страница 16

Страница: 16 / 82

(1) Main Display (Weight Display)

            A. Displaying the value of gross or net weight.
    B. Displaying error messages for any abnormal motion or weigh setup error/
    C. Displaying the status value for the Set Mode and weight setup mode.

(2) Status Display (Lamp)

Stable

The weighed weight is stable.

Tare

The current status is at the tare status.

Net weight

The currently displayed weight is a net weight.

Hold

The current status is under hold.

Zero point

The current weight is 0 kg.

Communication

The current status is at the communication status.

The current weight unit is set to kg.

The current weight unit is set to lb.

Lack

The weight is less than the setup value. (SC Only)

Fixed Quantity

The weight is within the setup range. (SC Only)

Excess

The weight is greater than the setup value. (SC Only)

Содержание CI-200 Series



















































































Результаты поиска

Содержание CI-200 Series

Отзывы:

Бренды по названию

Популярные бренды

CAS CI-200 Series, Руководство пользователя

Результаты поиска

Содержание CI-200 Series

Отзывы:

Бренды по названию

Популярные бренды