CAS CBW, Руководство пользователя

Страница: 18 / 83

19
1.6.1 Changing the Unit Display
Every time the key is pressed, the unit display changes sequentially among
those registered in the UNIT REGISTRATION menu.
Note:
Before a unit can be displayed it must be registered in the UNIT
REGISTRATION menu. Refer to “2.10 Unit Registration Menu and Unit
Change” for information on how to register units. The unit is displayed
sequentially according to the order of the UNIT REGISTRATION menu.
1.6.2 Changing the Minimum Display Digit (
／
)
It is possible to decrease the resolution of the minimum balance display by one
decimal place if necessary.
1) Press and hold the key for approximately three seconds. is
displayed and the display is decreased by one decimal place.
2) Press and hold the key for approximately three seconds. is
displayed and the display returns to the original number of decimal places.
1.7 Maintaining and Transporting the Balance
1.7.1 Cleaning the Balance
Use a soft damp cloth containing a neutral detergent to clean the balance.
Avoid using organic solvents, chemicals, or dusting sprays as they may damage the
coatings of the balance or the display panel.
Attach the in-use balance cover (standard accessory) when the balance is used in an
environment where it is susceptible to being soiled.
The pan can be removed and washed with water. Verify that the pan is completely dry
before replacing it on the balance.
1.7.2 Transporting the Balance
To carry the balance, hold the balance firmly with both hands.
To transport the balance, use the shipping carton used to deliver the balance.
Before placing the balance into the shipping carton, verify that the transportation
screws at the bottom of the balance have been tightened until they stop.