CAS CAU Series Скачать руководство пользователя страница 63

Страница: 63 / 119

10.4.3 Date Printout Setting

This setting determines whether or not the date and time on the balance’s built-in clock is
printed out along with the calibration report.

From mass display, press the

[CAL]

key

repeatedly until “SEttinG” appears.
Press the

[O/T]

key. “CAL dEF” appears.

Press the

[CAL]

key repeatedly until “Prtdt:**”

appears. The ** positions show the current
setting, “on” when set (print) and “oF” when
unset (do not print).

To change the setting, press the

[O/T]

key

when “Prtdt:**” is showing. The display will
show“Prdt-on”. (The “:” becomes “-”)

From this point, every time the

[CAL]

key is

pressed, the display will switch between
“Prdt-oF” and “Prdt-on”. Here, when the
current setting is displayed, the stability mark
(

) appears.

To change the setting, press the

[O/T]

key

when the desired setting appears, or

Press the

[POWER]

key to return to

“Prtdt: **” without changing the setting.

Press the

[POWER]

key again to return to the

mass display.

(When OFF)

(Example)

(When ON)

(Example)

(When ON)

(When OFF)

(Example)

Setting

check

During
setting

Setting

check

Содержание CAU Series
























































































































Результаты поиска

Содержание CAU Series

Отзывы:

CAS CAU Series, Руководство пользователя, Страница: 63 / 119

Результаты поиска

Содержание CAU Series

Отзывы: