CAS CAU Series Скачать руководство пользователя страница 44

Страница: 44 / 119

9. Display Settings

9.1 Bar Graph Display

This function displays a bar graph representation of the load on the pan. This may be used to
prevent sudden appearance of “oL” (overload) during measurement. This bar graph display
can be turned on or off.

Setting ON/OFF

Press the

[CAL]

key repeatedly from the mass

display and when “Func.SEL” appears,
press the

[O/T]

key. “CAL” is displayed.

Press the

[CAL]

key repeatedly unit

“AdiSP:**” appears. The ** position
displays the current setting “on” or “oF”.

Press the

[O/T]

key. “Ad-on” is displayed.

At this point, pressing the

[CAL]

key

switches the display between “Ad-on” and
“Ad-oF”.
When the current setting is displayed,
the stability mark (

) appears. To change the

setting, press the

[O/T]

key when the desired

setting appears, and the display will return to
“AdiSP:**”, indicating the new setting.

If no change is required, press the

[POWER]

key. The display returns to “AdiSP:**”.

Press the [POWER] key repeatedly to return

to the mass display.

Bar graph in weighing

...

(Example)

(When OFF)

(Example)

(When ON)

During
setting

(When ON)

During
setting

Setting

check

Setting

check

(Example)

(When about one third

of the capacity is used)

Содержание CAU Series
























































































































Результаты поиска

Содержание CAU Series

Отзывы:

CAS CAU Series, Руководство пользователя, Страница: 44 / 119

Результаты поиска

Содержание CAU Series

Отзывы: