4
5
1. I
ntroduCtIon
The correct and safe use of this Pedestal is only guaranteed if it is used in accordance with the following
manual and other documentation that accompanies the
P70 PLUS
Pedestal. It is therefore essential to
read all the documentation carefully and to keep it in a safe place.
Although the equipment features safety devices not all the risks inherent its improper use can be avoided.
It is necessary to always make sure that all operators have completely read and understood the instruc-
tions.
CARTONI
S.p.A.
accepts no responsibility for damage to persons and/or property consequent to
the improper use of the Pedestal.
Do not remove or deface any label, indication and warning affixed to the Pedestal.
CARTONI
S.p.A.
declines all responsibility for the failure to observe the standards of safety and preven-
tion detailed in the various sections of this manual and for injuries caused due to improper use.
Any modification to the Pedestal must have prior authorization by
CARTONI
S.p.A.
All the standard maintenance operations (maintenance, repairs, cleaning and adjustments) should be
carried out by competent personnel as prescribed in the manual.
1.1 P
roPer
use
The Pedestal has been designed and built for the support and movement of a Head with Camera/lenses
mounted on its horizontal and vertical axis.
In particular this manual refers to the machine specifications in section 2.
!
It is strictly forbidden to use the Pedestal in any other way other than indicated.
!
The components used must conform to the indications in section 2.
!
Do not remove or deface any label, indication or warning affixed to the machine.
!
Any modification to the Pedestal and/or its structure and/or accessories must have
prior authorization by
CARTONI
S.p.A.
!
Before using this Pedestal the manual should be read carefully. Whoever uses the ma-
chine must be well informed on the operative capacity and limits outlined in the manual.
1.2 W
arranty
The
P70 PLUS
Pedestal is covered by a warranty against manufacturing defects for 5 years from the date
of shipment (three years basic wa two years upon online registration to www.cartoni.com).
The warranty covers replacement of any defective part and the labour required excluding transport/duty costs.
In the case of replacement of single parts, these can be supplied free of charge by
CARTONI
S.p.A.
but
the owner will bear the cost of transport/duty charges for the parts.
The warranty is only valid if the Pedestal has been used properly as outlined in the manufacturer’s instruc-
tions and has not been exposed to any mishandling. The warranty will be immediately invalid if modifica-
tions and/or repairs are carried out by unauthorized persons otherwise authorized by
CARTONI
S.p.A.
Components subject to wear and tear are not covered by the warranty.
The warranty is also invalidated by one of the following events:
• Failure to comply with payment conditions
• Failure to carry out appropriate maintenance
• Removal or mistreatment of marks and/or labels containing data and technical specification.
CARTONI
S.p.A.
accepts no responsibility for damage to the Pedestal caused by improper use or the
malfunction of other equipment connected to the Camera support.
In any case, the warranty only covers Pedestal damage and/or malfunctions and does not entitle the
purchaser/owner to claim any damages for loss of production time due to assumed or proven damage
caused by and/or connected to the Pedestal itself.
1.3 a
uthorIzed
Personnel
Extraordinary maintenance and repairs to the machine can only be carried out by competent persons
who are either employed, trained or authorized by
CARTONI
S.p.A.
in writing.
Any information regarding repair/maintenance service stations can be obtained from
CARTONI
S.p.A.
1.4 r
egulatory
InformatIon
The design and construction of the Pedestal by
CARTONI
S.p.A.
complies with the regulations listed
below:
• UNI EN ISO 12100 (2010) Safety of machinery - General principles for design – Risk assesment
and risk reduction
• Directive 2006/42/CE Covering the harmonization of member States’ laws on machinery
• Presidential Decree 17/2010 of 27/01/2010: Regulation implementing EU directive 2006/42/
CE and subsequent amendments
Additional technical standards relating to specific safety measures as the UNI EN ISO 13857:2020 con-
cerning safety distance and the UNI EN ISO 13850:2015 concerning the emergency machine stop have
been considered.
