20
21
4. u
sIng
the
P
edestal
Height adjustment: when correctly balanced, the column can be used without any resistance throughout
the stroke capability.
In case one should need some resistance to the stroke, regulate the column damping by rotating the drag
knob (22).
The drag control knob (22) is not a lock.
Whenever needed, lock the height of the column operating the stroke lock lever (4).
4.1 C
able
g
uards
There is the risk of interference with cables or other obstacles under the Pedestal rubber wheels. A cable
guard (11) has been installed around each wheel to minimize this risk of interference.
For height regulation from the floor loosen the cable guard knob, lift or lower the cable guard, then
tighten the cable guard knob again. This system allows a variable height of protection from the floor 0
mm to ±15 mm. (The zone of interference is equal to 80 mm, complying to prospect 1 of standard UNI
EN ISO 13857:2020).
4.2 t
ravellIng
To wheel Pedestal into position, simply grasp steering wheel (2) and push.
The casters rotate freely when lever (13) is raised. By lowering lever (13) the casters can be locked into
six different positions at 60° intervals. The wheels can be locked individually or all together in the same
direction if the pedestal needs to track in a straight line.
To block all wheels and hence pedestal movement, lower levers (9).
4
22
