background image

24

25

5. d

IsassemblIng

 

and

 s

torage

!

 Before disassembling ensure that the load has been removed.

The Pedestal can be disassembled for transport and storage. Proceed as follows:

• Lock the three wheels with the wheel locks (9).

•  Lock the casters position along the skid leg with levers (13).

• Remove the whole load.

• Depressurize the Pedestal till to 1,5/2,0 bar (total bleeding is not compulsory).

• Open the safety latch (26) and push down the column to engage the safety latch (26) to the 

safety hooking bar (25).

 

Remove the steering wheel (2) from the steering wheel support (14) by:

• Unlocking the steering wheel with lock knob (23)

• Rotating the steering wheel (2) till the 

green

 mark couples the 

red

 mark on the steering wheel 

support (14).

• Lifting the steering wheel (2) and pulling it out from the steering wheel support (14).

Vertically lift the column and extract it from the skid.

Fold the three support struts (21) along the column.

Push the levers (24) to release the skid arms and rotate the two arms till to the levers (24) click, locking 
the arms in completely closed position.

6. s

ervICe

The Pedestal has been designed and built in a way to reduce as much as possible any maintenance, and 
to ensure problem-free efficiency over time.

After any maintenance operation, the Pedestal must be tested to ensure that it is working properly.

 

!

 Before starting any maintenance operation the Pedestal must be detached from any 

air supply line and the column completely depressurized as indicated in section 5.

 

 

Содержание PRO +
















Отзывы: