Cartoni PRO +, Руководство пользователя / Техническое обслуживание

Страница: 14 / 15

26 27
6.1 r
outIne
m
aIntenenCe
The pneumatic system does not require particular maintenance.
It is advisable to check the conditions of the inflating connection and of the in/out valve (1).
Use a damp cloth and no harsh cleaning product to remove dust, grease or other substances. It is partic-
ularly important to keep the wheels clean so that they can rotate freely.
Pedestal components should be carefully periodically inspected and any damaged part immediately re-
placed to prevent failures that might compromise the safety of the pedestal.
6.2 e
xtra
m
aIntenanCe and
s
Pare
P
arts
Whatever extra maintenance requires to be carried out by CARTONI ’s own technical servicing staff or
an authorized service station appointed by CARTONI S.p.A.
Information on authorized service station staff can be obtained by contacting CARTONI S.p.A or
www.cartoni.com.
For fast, effective problem solving CARTONI S.p.A. should be informed of the Pedestal model, the serial
number and the nature of the defect or its visible symptoms when the problem arises.
!
All warranty conditions are invalidated should any repair operation be attempted by
anyone not authorized by CARTONI S.p.A.
All spare parts should be ordered from CARTONI S.p.A. which will either supply them directly or indicate
where they may be obtained.
Remember that repairs should only be carried out by persons employed or authorized by CARTONI
S.p.A. All warranty conditions are invalidated should any parts be different from those originally mount-
ed on the Pedestal.
6.3 W
heel
e
xhange
r
eCommendatIon
A 160 mm wheel set is available to convert the Pedestal from Studio to OB version. Replace the wheels
as follows:
• Remove the column from the skid and turn it upside down;
• Unscrew and remove the screw (D) and loosen
the two grub screws (A) and the knob (B);
• Remove the three wheel groups (B) including
the cable guards;
• Assemble the new wheel
groups inserting the shafts (C) with the
flat surface on the shaft (C) according to
the grub screws (A) screwing direction;
• Tighten the screw (D)
and the grub screws (A)
to fix the wheel (B) to the shaft (C);
• Tighten the knob (E) to fix the cable guards.
6.4 f
oot
r
Ing
I
nstallatIon
Assemble the foot ring (16) screwing in the three knobs (A) on the skid (central part).
The foot ring (16) is useful for pushing the Pedestal and to prevent tip over of the Pedestal with off-set
components such as teleprompters or additional monitors.
D
A
A
B
C
E
A
B
16