Carrier SmartVu control, Руководство по управлению

Страница: 18 / 52

16
5 - SMARTVU CONTROL: MENU STRUCTURE
Pressures – PRESSURE
Point Name Status Default Unit Description Low Limit High Limit CCN Force LEN Force
DP_A 0 to 0 0 PSI Discharge
Pressure A 0 0
SP_A 0 to 0 0 PSI Main
Suction
Pressure A 0 0
DP_B 0 to 0 0 PSI Discharge
Pressure B 0 0
SP_B 0 to 0 0 PSI Main
Suction
Pressure B 0 0
DP_C 0 to 0 0 PSI Discharge
Pres THR 0 0
SP_C 0 to 0 0 PSI Main
Suction Pres
THR 0 0
sf_ec_p 0 to 0 0 "H2O Supply Fan
EC Plug 0 0
rf_ec_p 0 to 0 0 "H2O Return Fan
EC Plug 0 0
p_plenum 0 to 0 0 "H2O Return
Plenum
Pressure 0 0
p_bldg 0 to 0 0 "H2O Building
Pressure 0 0
Inputs – INPUTS
Point Name Status Default Unit Description Low Limit High
Limit CCN
Force LEN
Force
onoff_sw OPEN_CLOSE 0 - Remote On/Off
Switch 0 1
SP_SW1 OPEN_CLOSE 0 - Remote Setpoint
Switch 1 0 1
SP_SW2 OPEN_CLOSE 0 - Remote Setpoint
Switch 2 0 1
lim_sw1 OPEN_CLOSE 0 - Limit Switch 0 1
HS_FBK OPEN_CLOSE 0 - Heat Stages status 0 1
PRE_HS OPEN_CLOSE 0 - Pre-heat Status 0 1
sf_err OPEN_CLOSE 0 - Supply fan Status 0 1
rf_err OPEN_CLOSE 0 - Return fan Status 0 1
vspd_err OPEN_CLOSE 0 - VSPD Inverter Status 0 1
FIRE OPEN_CLOSE 0 - Fire Status 0 1
ENT_SW LOW_HIGH 0 - Enthalpy Switch 0 1
REF_LEAK OPEN_CLOSE 0 - Refrigerant Leak
Status 0 1
blank - Thermostat :
G OPEN_CLOSE 0 - Fan Contact 0 1
Y1_W2 OPEN_CLOSE 0 - CP #1 / Heat #2
Contact 0 1
Y_Y2 OPEN_CLOSE 0 - CP / CP #2 Contact 0 1
W_W1 OPEN_CLOSE 0 - Heat / Heat #1
Contact 0 1
O_W2 OPEN_CLOSE 0 - Heatcool / Heat #2
Ctact 0 1
blank - Air Control :
dirt_flt OPEN_CLOSE 0 - Dirty Filter 0 1
iaq 0 to 0 0 ppm Indoor Air Quality 0 0
RH 0 to 0 0 V Relative Humidity 0 0
hrw_fbk OPEN_CLOSE 0 - HR Wheel Feedback 0 1
hpsw_a OPEN_CLOSE 0 - High Pressure Switch
A 0 1