Carrier RAV-SP180CT-UL Скачать руководство пользователя страница 164

Страница: 164 / 191

– 164 –

No.

Part name

Fan motor

Procedure

1. Detachment

1) Carry out works 1), 2), 3) and 5) of

Detachment of

2) Remove wires and connectors which are

connected from the control P.C. board to the

fan motor.

NOTE :

Release the lock of the housing part and then

remove the connectors.

CN333 : Fan motor power supply (5P: White)
CN334 : Fan motor position detection

(5P: White)

3) Remove the screws of the fan motor fixing

fittings. Earth screws are tightened together.

(M5, 10 mm, 2 pcs.)

4) Remove the fan motor while supporting it with

hands so that the fan motor does not fall.

2. Attachment

1) Mount the fan motor and the motor fixing

fittings, tighten it together with earth wire

and then fix them with the screws.

2) Connect the connectors as before, which

were removed in works of Detachment.

3) Carry out work of Attachment of

Remarks

1. Detachment

1) Carry out work of Detachment of

2) Remove screws of the side cover.

(One-side: M4, 12 mm, with washer, 1 pc.)

3) Slide the side cover toward discharge

direction to remove the side cover.

2. Attachment

1) Slide the side cover toward sucking direc-

tion and mount it while inserting hooking

claw of the side cover into the square hole

at side of the main unit.

2) Attach screws to the side cover.

(One-side: M4, 12 mm, with washer, 1 pc.)

3) Carry out work of Attachment of

Side cover

Fan motor

Earth screw

Fan motor fittings

Side cover

Screw

Side cover

Detaching direction
Attaching direction

Содержание RAV-SP180CT-UL































































































































































































Результаты поиска

Содержание RAV-SP180CT-UL

Отзывы:

Carrier RAV-SP180CT-UL, Руководство по обслуживанию, Страница: 164 / 191

Результаты поиска

Содержание RAV-SP180CT-UL

Отзывы: