– 160 –
No.
3
Part name
Electric
parts box
Procedure
1. Detachment
1) Carry out works of Detachment of
1
and
2
.
2) Remove the power supply wire and the
remote controller wire from the power
supply terminal block and the remote
controller terminal block each.
3) Remove the power supply wire from cord
clamp at side of the electric parts box.
4) Remove screws (M4, 10 mm, 2 pcs.) of the
electric parts box and pull out downward.
5) Hook the hooking section temporarily at the
rear side of the electric parts box to the
sheet fittings part of the main unit.
2. Attachment
1) Insert the square hole of the electric parts
box into the claw of the main unit.
2) Attach screws (M4, 10 mm, 2 pcs.) to the
electric parts box.
3) Connect the power supply wire and the
remote controller wire as before.
4) Carry out works of Attachment of
1
and
2
.
Remarks
Electric
terminal block
Remote controller
terminal block
Screw
Cord clamp
Claws of main unit
Hooking sections
g
of electric parts box
Square hole of
electric parts box
Sheeted folding up
section of main unit