Carrier P1 Series, Инструкция для владельца и по установке, Страница: 8 / 38

Setting Current Time
BEFORE OPERATION
4 5 6
Press the TA button with a sharp object and
the current time indication symbol flashes.
In the beginning, 6:00A.M. will flash. Set the current time with the hour and the
minute buttons while the current time
indication flashes. Press the TA button again.
The flashing will stop and the current time
will be set.
• Changing batteries should be done after turning off the unit.
• When the air conditioner does not operate normally after replacing the batteries, remove the batteries, refit and repress the RST button after 5 seconds.
NOTE
RESERV
.
CANCEL RESERV
.
CANCEL
6
Replacing Batteries
1 2 3
Remove the cover of the battery
compartment at the back of the remote
control by sliding it out in the direction of the
arrow. Remove the used batteries and insert new
batteries. The remote control uses two
batteries.(1.5V(L)R03x2) Press the RST button with a sharp object
to reset the remote control before closing
the cover of the battery compartment.
RESERV
.
TA
OFF