manualshive.com logo in svg

Carrier P1 Series, Инструкция для владельца и по установке, Страница: 14 / 38

Поделиться
Скачать
Carrier P1 Series Скачать руководство пользователя страница 14

햲

햳

햴
햳
햲

1
2

1
2

UNIT OPERATION

햳

햲

For example, when you want the operation to start at 5:30
P.M. and stop at 10:30 P.M..

Reserve the ON Timer at 5:30 P.M..

Reserve the OFF Timer at 10:30 P.M..

When you want to stop the operation at 10:30 P.M.
and start again at 7:30A.M. with the same condition.

Reserve the OFF Timer at 10:30 P.M. during operation.

Reserve the ON Timer at 7:30 A.M..

When you want to start operation at 5:30 P.M. and stop at
10:30 P.M. everyday with the same operating condition.

Reserve the ON Timer at 5:30 P.M..

Reserve the OFF Timer at 10:30 P.M..

Press the EVERYDAY button and RESERV. button.

PROCEDURE .................................................................................

1
2
3

• In the ON and OFF Timer operation, the earlier setting compared to the current time will  be applied first.
• The EVERYDAY Timer can be selected in case of a combination of the ON and OFF Timer reservation or ON and SLEEP Timer reservation.
• You can change the ON/OFF reservation time during the EVERYDAY Timer reservation.
• If you cancel the ON Timer or OFF Timer reservation while EVERYDAY Timer is reserved, EVERYDAY Timer will be automatically canceled.
• When the electricity fails while EVERYDAY Timer is reserved, EVERYDAY Timer reservation will be canceled.
   Reserve the EVERYDAY Timer again after the electricity comes on.
• The current time will not be indicated and the TIMER lamp of the indoor unit will be on if either the ON Timer or  the OFF Timer is reserved.

NOTE

Press the ON TIMER button to cancel the ON Timer
or press OFF TIMER button to cancel the OFF Timer.
To cancel the EVERYDAY Timer reservation, press
the EVERYDAY, ON TIMER or OFF TIMER button.

Press the CANCEL button by pointing the remote
control towards the receiver of the indoor unit.
• A receiving beep is heard.
• TIMER lamp of the indoor unit lights off.

1

2

CANCELLATION ....................................................................

12

  Combination of ON, OFF and EVERYDAY  Timer

Содержание P1 Series







































Отзывы:

Нет отзывов