Carrier P1 Series Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 38

Carrier P1 Series Скачать руководство пользователя страница 20

1234567890123456789012345678901212345678901234567890123456789012123456

1234567890123456789012345678901212345678901234567890123456789012123456

1234567890123456789012345678901212345678901234567890123456789012123456

1234567890123456789012345678901212345678901234567890123456789012123456

• Use only a damp soapy towel.

CARE AND MAINTENANCE

18

• Turn off the unit and pull out the power plug before washing.
• Clean the front panel if it becomes dirty and spotted.
• Front panel is removable.

NOTE

Washing the Front Panel

1

2

3

Lift the front panel up to the top of the
unit and separate it from the unit.

Rinse the panel under running water
and dry completely in a shaded area.

Refit it correctly. Installation procedure
is reverse to the removal procedure.

1234567890123456789012345678901212345678901234567890123456789012123456

1234567890123456789012345678901212345678901234567890123456789012123456

1234567890123456789012345678901212345678901234567890123456789012123456

1234567890123456789012345678901212345678901234567890123456789012123456

1234567890123456789012345678901212345678901234567890123456789012123456

CLEANING THE MAIN UNIT

• When cleaning the unit, first turn it off and pull out the power plug.

NOTE

AFTER-SEASON CARE

1

2

Clean the filters and refit them into the unit.

If the unit is to be switched off for an extended
period, run the unit on FAN only for two hours
to dry inside of the unit.

«
...
18
19
20
21
22
...
»

Содержание P1 Series







































Отзывы:

Нет отзывов