Installing the VVT Bypass Controller
VVT Bypass Controller
Carrier Proprietary and Confidential
CARRIER CORPORATION ©2017
Installation and Start-up Guide
All rights reserved
15
NOTE
Maintain polarity if using the same power supply for more than one actuator.
Wiring and mounting the Equipment Touch
CAUTION
If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
See the
Equipment Touch Installation and Setup Guide
for more details.
Mounting
The Equipment Touch must be mounted within the building interior. You can mount the Equipment Touch:
•
In a panel with the controller or on the panel door
•
On a wall up to 500 feet from the controller
