Document revision history
VVT Bypass Controller
Carrier Proprietary and Confidential
CARRIER CORPORATION ©2017
Installation and Start-up Guide
All rights reserved
34
Important changes to this document are listed below. Minor changes such as typographical or formatting errors are not
listed.
Date
Topic
Change description
Code*
2/7/17
To wire the controller to the BACnet
network
Added BACnet ARC156 connection information
C-D
Wiring for communications
Changed from Wiring the VVT Bypass Controller to the MS/TP
network
C-D
Sequence of operation - Linkage
modes and operation
Clarified reason and method for generating a particular mode.
Evacuation/Shutdown changed to Evacuation.
C-AE-WB-E
Specifications
Added ARC156.
C-D
Cover
What is the VVT Bypass Controller?
Updated picture
C-D
2/22/16
Start-up
Added USB Link wiring caution.
C-TS-RD-E-JH
Removed all references to
BACview
C-D
12/7/15
What is a VVT Bypass Controller?
Note on metric version.
C-AE-WB-E
To mount the controller
Corrected the nut size to M5.
CA-AE-WB-E-RE
To clean the airflow sensor orifice
New topic
AC-TS-TS-E
2/12/15
To mount the controller
Variable frequency drive
Bypass damper
Corrected the term "duct static pickup" to "duct static pressure
probe". Added the part number.
C-TS-JN-E
6/19/14
Restore factory defaults
Added information on using the Factory Defaults Shorts pins
C-D-LJ-E-RD
* For internal use only
Document revision history
