manualshive.com logo in svg

Carrier MINIMUM LOAD CONTROL ACCESSORY 30RB060-390, Руководство по установке, Страница: 60 / 76

Поделиться
Скачать
Carrier MINIMUM LOAD CONTROL ACCESSORY 30RB060-390 Скачать руководство пользователя страница 60

60

TERMINAL BLOCK

FIELD  POWER  SUPPLY

GROUND

(SEE NOTE #2)

21

11

DISCONNECT/BRANCH CIRCUIT

PROTECTION PER NEC

22

12

23

13

EQUIP GND

TB1A (STANDARD POWER ENTRY)

TB1B/TB1C OPTIONAL DUAL POINT POWER ENTRY

NON-FUSED DISCONNECT

FIELD  POWER  SUPPLY

GROUND

(SEE NOTE #2)

DISCONNECT/BRANCH CIRCUIT

PROTECTION PER NEC

EQUIP GND

CB1A ((STANDARD DISCONNECT POWER ENTRY)

CB1B (OPTIONAL DUAL POWER ENTRY POINT FOR DISCONNECT)

1

2

3

NOTES:

1. FACTORY WIRING IS IN ACCORDANCE WITH UL 1995 STANDARDS. FIELD MODIFICATIONS    OR ADDITIONS MUST BE IN COMPLIANCE WITH ALL APPLICABLE CODES. 2. WIRING FOR MAIN FIELD SUPPLY MUST BE RATED 75C MINIMUM. USE COPPER FOR ALL 

UNITS.

   INCOMING WIRE SIZE RANGE FOR THE TERMINAL BLOCK IS #4 AWG TO 500 KCMIL.    INCOMING WIRE SIZE RANGE OF NON-FUSED DISCONNECT WITH MCA UP TO 599.9 AMPS 

IS 3/0 TO 500 KCMIL.

   INCOMING WIRE SIZE RANGE OF NON-FUSED DISCONNECT WITH MCA FROM 600 TO 799.9 

AMPS IS 1/0 TO 500 KCMIL.

   INCOMING WIRE SIZE RANGE OF NON-FUSED DISCONNECT WITH MCA FROM 800 TO 1199.9 

AMPS IS 250 KCMIL TO 500 KCMIL.

3. TERMINALS 9  AND 10 OF TB5 ARE FOR FIELD EXTERNAL CONNECTIONS FOR REMOTE 

ON-OFF.

   THE CONTACTS MUST BE RATED FOR DRY CIRCUIT APPLICATION CAPABLE OF HANDLING A     24VAC LOAD UP TO 50 MA. 4. TERMINALS 1 AND 2 OF TB5 ARE FOR EXTERNAL CONNECTIONS OF CHILLED WATER PUMP 

INTERLOCK.

   THE CONTACTS MUST BE RATED FOR DRY CIRCUIT APPLICATION CAPABLE OF HANDLING A    24VAC LOAD UP TO 50 MA. 5. TERMINALS 11 AND 13 OF TB5 ARE FOR CONTROL OF CHILLED WATER PUMP1 (PMP1) 

STARTER.

   TERMINALS 13 AND 15 OF TB5 ARE FOR CONTROL OF CHILLED WATER PUMP2 (PMP2) 

STARTER.

   THE MAXIMUM LOAD ALLOWED FOR THE CHILLED WATER PUMP RELAY IS 5 VA SEALED, 10 

VA

   INRUSH AT 24V. FIELD POWER SUPPLY IS NOT REQUIRED. 6. FOR CONTROL OF CHILLED WATER PUMPS, A SET OF NORMALLY OPEN CONTACTS RATED 

FOR DRY CIRCUIT APPLICATION

   MUST BE SUPPLIED FROM FIELD SUPPLIED PUMP STARTER RELAY. CONNECT CONTACTS TO 

VIOLET AND PINK WIRES IN

   HARNESS FROM MAIN BASE BOARD CHANNEL 18. WIRES IN HARNESS ARE MARKED PMP1-13 

AND PMP1-14.

7. TERMINALS 12 AND 13 OF TB5 ARE FOR A ALARM RELAY. THE MAXIMUM LOAD ALLOWED 

FOR THE

   ALARM RELAY IS 10 VA SEALED, 25 VA INRUSH AT 24V. FIELD POWER SUPPLY IS NOT 

REQUIRED.

8. MAKE APPROPRIATE CONNECTIONS TO TB6 AS SHOWN FOR ENERGY MANAGEMENT BOARD 

OPTIONS. THE

   CONTACTS FOR OCCUPANCY OVERRIDE, DEMAND LIMIT AND ICE DONE OPTIONS MUST BE 

RATED FOR

   DRY CIRCUIT APPLICATION CAPABLE OF HANDLING A 24VAC LOAD UP TO 50 MA. 9. J3 - 24 AND 25 OF EMM BOARD ARE FOR RUN RELAY AND SHUTDOWN RELAY. THE 

MAXIMUM

   LOAD ALLOWED FOR THE RUN AND SHUTDOWN RELAY IS 10 VA SEALED, 25 VA INRUSH AT 

24V.

   FIELD POWER SUPPLY IS NOT REQUIRED.

10.   250-OHM ½-W

ATT RESIST

OR IS FIELD-SUPPLIED.

DUPLEX UNITS

SIZE

STD UNIT

315A,B 330B

160

330A 345A,B 360B

170

360A 390A,B

190

LEGEND:

A   -  ALARM PMPI-  CHILLED WATER PUMP INTERLOCK CWP -  CHILLED WATER PUMP EMM -  ENERGY MANAGEMENT SHD R- SHUTDOWN RELAY RUN R- RUN RELAY MLV -  MINIMUM LOAD VALVE TB  -  TERMINAL BLOCK        FIELD POWER WIRING        FIELD CONTROL WIRING        FACTORY INSTALLED WIRING

a30-5709

Fig. 5

8

 — Co

ntr

ol a

nd Powe

r 

Wiring Sche

mat

ic

, 30

RB0

60-

39

0 (c

ont

)

Содержание MINIMUM LOAD CONTROL ACCESSORY 30RB060-390













































































Отзывы:

Нет отзывов