Carrier KFCEH0401N03 Скачать руководство пользователя страница 1

NOTE:

Read the entire instruction manual before starting the installation.

This symbol

indicates a change since the last issue.

SAFETY CONSIDERATIONS

Installing and servicing heating and air conditioning equipment can be hazardous due to system pressures and electrical components. Only trained
personnel should install or service heating and air conditioning equipment.
Untrained personnel can perform basic maintenance functions such as cleaning coils, or cleaning and replacing filters. All other operations should
be performed by trained service personnel. When working on heating and air conditioning equipment, observe precautions in the literature, on tags,
and on labels attached to the unit.
Follow all safety codes. Wear safety glasses and work gloves. Have a fire extinguisher available.
Recognize safety information. This is the safety-alert symbol

.

When you see this symbol on the unit and in instructions or manuals, be alert to the potential for personal injury.
Understand the signal words DANGER, WARNING, CAUTION, and NOTE. These words are used with the safety-alert symbol. DANGER
identifies the most serious hazards which will result in severe personal injury or death. WARNING signifies hazards which could result in personal
injury or death. CAUTION is used to identify unsafe practices which would result in minor personal injury or product and property damage. NOTE
is used to highlight suggestions which will result in enhanced installation, reliability, or operation.

WARNING: Before beginning any installation or modification, be sure the main electrical disconnect switch is in the

OFF position. Tag the disconnect switch with a suitable warning label. Electrical shock can cause personal injury or death.

Fig. 1—Installation of 18-, 24-, and 30-kw Model Heaters

A90154

MULTI-CIRCUIT

GROUND LUG

TERMINAL

BLOCK

SINGLE-CIRCUIT

GROUND LUG

ADAPTER PLATE

(MUST BE REMOVED WHEN

INSTALLING LARGE HEATER)

FUSE BLOCK
(24- AND 30-KW)

FUSE COVER
(OMITTED ON 18-KW)

CLIP LATCH

Installation Instructions

KFCEH

Electric Heater
Packages

Form:

AG-FCEH-09

Cancels:

AG-FCEH-08

Printed in U.S.A.

4-03

Catalog No.

63FC-EH7

Содержание KFCEH0401N03













Отзывы: