Carrier 16LJ-01 Скачать руководство пользователя | Manualshive

Страница: 8 / 56

background image

4

SAFETY PRECAUTIONS

NEVER CHANGE THE SET VALUE

STOP THE OPERATION WHEN BLACK SMOKE
RISES

              Never change the set value of the safety
              and/or protective devices.    Wrong setting
              may damage the chiller/heater or cause a
                                                                                    fire.

Stop the operation when black smoke
rises and call service agent, to prevent

a fire by poor combustion.

Must be observed

DO NOT TOUCH THE ABSORBENT

OBSERVE THE SPECIFIED PRESSURE OF WATER

              Do not touch the spare or leaked
              absorbent which may cause corrosion of
              metal areas or cause skin diseases.

Prohibited

              The specified pressure of chilled/hot water
              and cooling water must strictly be observed.
              Incorrect pressure may cause spout or
              leak which may cause a short circuit or

Must be

observed

burns.

DO NOT TOUCH THE HIGH TEMPERATURE
AREAS

STOP THE PURGE PUMP TO REPLACE OIL

                Do not touch the high temperature areas.
                These areas are indicated by caution
                label.    Please avoid touching
                such areas to prevent burns.

Prohibited

              Please stop the purge pump when
              replacing oil to avoid possible injury by
              fuel scatter.

Must be observed

STOP

Prohibited

«
...
6
7
8
9
10
...
»

Содержание 16LJ-01

























































Отзывы:

Нет отзывов

Похожие инструкции для 16LJ-01

Бренд: McQuay Страницы: 20

Millennium YCAR 0100SC

Бренд: York Страницы: 24

Бренд: RYNO Страницы: 23

EM 700 ELECTRIC

Бренд: Gardeline Страницы: 12

Бренд: Ozito Страницы: 22

Бренд: Schiller Grounds Care Страницы: 36

Бренд: Kaysun Страницы: 160

Touch Pilot Control Series

Бренд: Carrier Страницы: 36

TOUCHPILOT 30KAV

Бренд: Carrier Страницы: 44

Operator's Manual

Бренд: Echo Страницы: 36

Бренд: GreenWorks Pro Страницы: 30

HYDROPONIC HY 1000

Бренд: TecoPonic Страницы: 98

Бренд: Foster Страницы: 1

Бренд: Foster Страницы: 32

Бренд: ClimaCool Страницы: 72

LAWNAIRE 28 544874F

Бренд: ryan Страницы: 26

accu-system BL 7/25

Бренд: Gardena Страницы: 8

Бренд: Haskris Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды