Carrier Access BROADway System 770-0125-AB, Руководство по установке

Страница: 74 / 96

3-26 BROADway - Release 4.00
Configuration
Managing the BROADway Configuration Database
To delete an OFFLINE database, use the
DLT-DB
TL1 command:
DLT-DB::NSP:1234::<name>;
<name>
—User defined OFFLINE database name.
Examples:
Delete the database called offlinename from the active NSP:
DLT-DB::NSP:1234::offlinename;
Delete the database called offlinename from NSP-1:
DLT-DB::NSP-1:1234::offlinename;
Deletes the database called offlinename from NSP-2:
DLT-DB::NSP-2:1234::offlinename;
You cannot delete the database that is either currently stored as RUNNING or SAVED .
To initialize the database system to its factory default, use the
INIT-DB
TL1 command:
INIT-DB::NSP:1234;
After you initialize the database, reboot the BROAD way system using the
INIT-SYS
TL1 command
(see page 3-27).
CAUTION!
U
SE THE
INIT-DB
COMMAND WITH EXTREME CARE AS IT WILL RESET THE
SAVED
CONFIGURATION DATABASE TO A FACTORY DEFAULT STATE
. E
NSURE YOU HAVE A
BACKUP OF ANY PREVIOUS SAVED CONFIGURATION BEFORE YOU EXECUTE THIS COMMAND
.
Exporting the BROADway Database to a TL1 Script
The BROAD way embedded database is designed to offer fast access to each configuration element of
the BROAD way switch. However, it is not stored in a simple human-readable format. To dump the
contents of the database to a TL1 script format, the following TL1 commands can be used:
EXEC-SYS::NSP:1234::cfgDumpTL1;
EXEC-SYS::NSP:1234::cfgDumpTL1verbose;
The
EXEC-SYS
command accesses each element configuration table within the database in turn and
converts the contents to a series of TL1 commands. The first variant of the command will only print
information that is changed from the default switch settings. The second variant of the command will
print the entire database as a series of TL1 commands.
In this release of the system software, the output is sent to the console from which the command was
executed, i.e. the serial craft port or a Telnet session. An operator using a terminal emulation program
such as Hyperstream can capture the output from the switch to a file on the local PC, and replay it back
to the switch to configure the product.
It is also possible to capture the output, modify certain script parameters and then play it back to
replicate a single configuration easily on multiple
BROAD way switches.